Optimizing Wireless Performance with RTS/CTS & Thresholds
Published by Christopher Porter on November 11, 2024
Optimizing Wireless Network Performance with RTS/CTS and Fragmentation Thresholds
In networks with high user traffic or intermittent connection issues, tweaking advanced settings on wireless routers can enhance performance and address connectivity problems, especially when devices struggle to obtain IP addresses.
Most routers feature an “Advanced Settings” section to manage data handling. High-end wireless LANs support the RTS (Request to Send) threshold, part of the 802.11 standard, which controls access to the network medium through an RTS/CTS (Clear to Send) handshake.
How RTS/CTS Works
RTS/CTS reduces data collisions by establishing a handshake before data transmission:
RTS/CTS Handshake Process
-
1
The sending device initiates with an RTS frame. -
2
The receiving device replies with a CTS frame, instructing other devices to wait.
This handshake minimizes hidden node collisions in networks with widespread devices, helping stabilize data flow in busy networks.
Configuring the RTS Threshold
The RTS threshold determines when RTS/CTS is used, generally for packet sizes above 2347 bytes. Reducing this threshold triggers RTS/CTS for smaller packets, reducing collisions but potentially adding latency.
Configuration Steps
-
01
Monitor Network ConditionsIdentify collisions or connectivity issues.
-
02
Adjust GraduallyReduce the threshold incrementally and test.
-
03
Consider Hidden NodesRTS/CTS is most beneficial if hidden nodes cause frequent collisions; otherwise, it may lower throughput.
RTS vs. Fragmentation Threshold
RTS Threshold
Generally set around 500 bytes
Can be lowered to avoid collisions in high-interference areas. Each adjustment should be tested over time to verify improvements.
Fragmentation Threshold
Typically at 2346 bytes
Specifies the maximum packet size before fragmentation, aiding performance in high-interference environments by breaking down large packets.
Real-World RTS/CTS Use
In dense environments like hotels or offices, RTS/CTS improves network stability, recovering quickly from issues if the RTS threshold is finely tuned. The fragmentation threshold also helps when interference is high, with values between 1500 and 2346 bytes often yielding improved transfer rates.
Optimal Settings by Environment
Note:
Testing with 802.11 simulation tools can help determine optimal settings, though fine-tuning the actual network based on real-world results is recommended. Through thoughtful configuration, RTS/CTS adjustments can optimize connectivity and improve throughput for users across wireless LANs.
